INON 45o Viewfinder Unit for Sea and Sea Housings
The 45 degree angle helps you keep bubbles out of your vision and allows you to get the camera at much lower shooting angle. It gives you the freedom to shoot on the flat ocean bottom while still being able to see through the finder.
These finders are easily user interchangeable, enabling selection of appropriate viewfinder for different lenses, shooting conditions, styles & personal preferences.
These are high performance viewfinders that extends eyepoint without changing image size in viewfinder. 100% of camera’s finder image is seen (1.0x) without any vignetting, even underwater with a mask.
The viewfinder is positioned in parallel with the camera’s finder so viewing replicates same natural eye position relative to camera as when shooting on land.
INON AD Lens Holder
You can set up this holder to hold a single lens or two lenses on an Ultralight or Inon arm segment.
INON Optical D Cable/Cap set
INON [Optical D Cable Type L / Cap Set] is a key component to reliably trigger an external strobe in synch with built-in flash light and each different model is designed specifically to suit to each camera model to attach directly on built-in diffuser panel of genuine underwater housing or a Mount Base. [Optical D Cable Type L]consists of optical fiber to provide more reliable and faultless external strobe control comparing to conventional wireless slave connection especially in severe condition like under surface or backlit circumstances. INON [Clear Photo System] effectively suppress transparent underwater housing drawbacks like backscatter, ghost or flare caused by camera’s built-in flash to obtain more clear image.
Compatible with various camera brands and models depending on the model.
- Optical D Cable Type L / Cap W3 Set
- Optical D Cable Type L / Cap W9 Set
- Optical D Cable Type L / Cap W10 Set
- Optical D Cable Type L / Cap W29 Set
- Optical D Cable Type L / Cap W36 Set
- Optical D Cable Type L / Cap W40 Set
INON Shoe Base
INON «Shoe Base Set» enables INON strobe directly attached on compact digital camera underwater housing to provide more «compact» and «reasonable» set-up. Simply installs the Shoe Base Set on the hot-shoe of Panasonic marine-case including [DMW-MCFS5] [DMWMCFX40] [DMW-MCTZ7] or underwater housing from Olympus, Fujifilm and anybody can benefit external strobe shooting with compact gears without complicated setting. The Shoe Base Set is only 68.5mm in length. Boon to divers to keen to «diet» diving gears or divers hesitating to have external strobe.
Weight : 41g [air] / approx.20g [underwater]
INON Holder II Set
Set contents: Main Base II, Holder II
The Main Base II is a fundamental component of the Holder II Set and attached on an underwater housing via two tripod screws or one tripod screw on Nikonos V to attach Arm II strobe arm system directly. The Holder II comfortably supports the back of your right hand with pre-installed 10mm neoprene rubber when holding INON X-2 series housing or Nikonos V and is slidingly adjustable to suits to different hand size. INON strobe arm system is directly attached on the Holder II.
- Weight : 212g (7.5oz) [air] / approx.66g (2.3oz) [under surface]
- Compatible Underwater Camera Housing: INON X-2 for EOS10D, INON X-2 for EOS20D, INON X-2 for EOS30D, INON X-2 for EOS50D/40D, INON X1-Z, INON X1-NZ, INON X-LZ, Nikonos V, NikonosRS, Olympus PT-E03, Olympus PT-E05, Olympus PT-E06
*Nikonos V/RS is fixed by single tripod screw.
INON AD Mount Base PT-041 for Olympus PT-041
«AD Mount Base・PT-041″ enables to use INON «AD Mount series» attachment lens. AD mount series attachment lens lineup consists «UFL-165AD Fish-eye Conversion Lens» to shoot ultra wide image, «UWL-105AD Wide Conversion Lens» to shoot wider area and «UCL-165AD» to shorten minimum focus length to close to a subject.
INON AD Mount Base DC2 for Canon DC2
This INON mount base is designed for the Canon DC2 housing, which accommodates the Canon A540 camera.
The AD mount base is the attachment point for INON’s UFL-165AD Fisheye, UWL-105AD Wide Angle and UCL-165AD Close-up lenses.
The AD Mount Base is compatible with the Optical D Cable/Cap W29 set fiber optic cable for strobe use (INON D-2000Wn, D-2000W, D-2000S, D-2000, D-180, D-180S, Z-240, Z-220, Z-220F and Z-220S)
INON Grip Base (DII or DIII) or ULCS Digital Tray (tr-d) can also be attached to the bottom of the mount base if needed.
INON AD Mount Base DC3/4/13/14 for Canon DC3/4/13/14
This INON mount base is designed for the Canon DC3/4/13/14 housing, which accommodates the Canon SD630/600/1000/750 cameras.
The AD mount base is the attachment point for INON’s UFL-165AD Fisheye, UWL-105AD Wide Angle and UCL-165AD Close-up lenses.
The AD Mount Base is compatible with the Optical D Cable/Cap W30 set fiber optic cable for strobe use. (INON D-2000Wn, D-2000W, D-2000S, D-2000, D-180, D-180S, Z-240, Z-220, Z-220F and Z-220S)
INON Grip Base (DII or DIII) or ULCS Digital Tray (tr-d) can also be attached to the bottom of the mount base if needed.
INON AD Mount Base DC900/50 fotr Canon WP-DC900/WP-50
With the above INON product, you can use variety of INON underwater imaging equipments like «AD Mount series» attachment lens and «S-TTL» Auto strobe D-2000 series for above camera models.
By installing «AD Mount Base DC900/50″ on compatible camera (Canon DC900 / WP-DC50 housings), INON «AD Mount series» attachment lens like «Underwater Fish-eye Conversion Lens UFL-165AD», «Wide Conversion Lens UWL-105AD», «Close-up Lens UCL-165AD», can be instantly attached on.
Use «Optical D Cable» enables you to use «S-TTL» Auto strobe D-2000 series, «S-TTL Auto» gives you fine result of correct exposure simply by pressing shutter release button
INON system offers simple and reliable underwater shooting any subject from «Fish-eye shot» to «Ultra macro shot».
INON AD Mount Base DC19-27 for Canon WP-DC19/WP-DC27
Mount Base for Canon WP-DC19 and WP-DC27 housings secures housing firmly with no rotation. Also, quickly and securely attach INON UFL-165AD Fisheye, UWL-105AD Wide Angle and UCL-165AD Close-up lenses to the integral AD bayonet mount. Compatible with Optical D Cable/Cap W27 Set fiber optic cable. And, install single or double Grip Base DII or DIII to the bottom of the AD Mount Base.
This multi-featured mount base:
- Firmly secures Canon WP-DC19 and WP-DC27 housings from rotating on the base.
- Has an integral INON AD bayonet mounting ring for quick and easy “one-touch‿ mounting of:
- UFL-165AD Underwater Fisheye Conversion lens
- UWL-105AD Wide Angle Conversion Lens
- UCL-165AD Close-up Lens (165mm focal length)
- Accepts Optical D Cable/Cap W27 Set fiber optic cable and attachment fixtures for connecting to INON D-2000Wn, D-2000W, D-2000, D-2000S, D-180, D-180S, Z-240, Z-220, Z-220F and Z-220S strobes.
- Accepts single or double Grip Base DII or DIII grip handles.
INON AD Mount Base DC800 for Canon WP-DC800
Mount Base for Canon WP-DC800 Housing (Canon Powershot S500, S410 & S400 cameras) secures housing firmly with no rotation. Also, quickly and securely attach INON UFL-165AD Fisheye, UWL-105AD Wide Angle and UCL-165AD Close-up lenses to the integral AD bayonet mount. Compatible with Optical D Cable/Cap W3 Set fiber optic cable. And, install single or double Grip Base DII or DIII to the bottom of the AD Mount Base.
INON D Base PT-027-022-020
Base plate for securely mounting INON Grip Base D III and Grip Base DII to the Olympus PT-020, PT-022 and PT-027 housings. From the D Base PT-027/022/020, either one or two Grip Base DIII or DII can be attached.
INON Battery Box Inner Cap for S-2000
Inon Spare battery box inner lid for S-2000 strobe.Includes battery terminal contacts.
INON Battery Box O-Ring
Inon O-Ring for Battery Box of Z-240, S-2000, D-180 and D-2000 Series Strobes
Updating…
