Econoptics

If a picture is worth a thousand words, then a great photograph can speak volumes. But capturing a compelling image, even under the best conditions, requires skill, luck, and patience. Without working camera equipment, though, no combination of those attributes will put an image on paper. And whether you’re going to a family reunion across the country or on assignment halfway around the world, your gear has to be ready to go. Pack it in a Storm Case, and it will be.

Lightweight, waterproof, and virtually indestructible, Storm Cases are ideal for protecting delicate camera equipment and accessories from shock, impact, vibration, water, and dust. Multilayered foam can be shaped to your specific needs, or you can use optional padded dividers to keep sensitive gear—such as lenses, flash units, and light meters—separate, stable, and secure. Available lid or utility organizers provide added flexibility, keeping papers or smaller accessories like film, filters, and cleaning equipment safe and out of the way. And Hardigg’s Press & Pull latches allow you to get to your cameras quickly, yet hold fast under stress.

To protect your gear, there’s no better place than a Storm Case.

Επικοινωνήστε μαζί μας για μοντέλα και τιμές

This lens is designed for Canon water-proof case WP-DC28 & WP-DC34.
It can offer dynamic wide angle photography by just attaching it to the housing. It can be easily used by setting it in front of the lens port of WP-DC28 or WP-DC34.

• Magnification: 0.7 times
• Waterproof: 60m
• Lens elements: air lens

Επικοινωνήστε μαζί μας για τιμή

FWAL-02 is an accessory Wide Angle Lens which fits over the housing’s port and can be installed and removed during the course of the dive.

Compatible with:

• Fantasea Nikon Coolpix Housings (all but FS-5, FS-6 FS-9 and FS-51 Housings).
• Additional Adaptor (#4095) required for the CP-5 and CP-7 Housings.
• Additional Adaptor (#4096) required for the CP-3, CP-3N, CP-4, CP-6, FL-3, FL-4, FL-6, FP-1 and FP-4 Housings.
• Can be mounted directly on top of all other Fantasea Nikon Coolpix housings lens ports (all but the FS-5, FS-6, FS-51 and FS-9 Housings).
• Almost all Olympus housings
• Other housings with a 46mm or 52mm threaded lens port.

Included in Kit:

• Underwater Wide Angle Conversion Lens
• M52 to M46 Step Down Ring
• Lens Pouch
• Front and Rear Lens Caps

Specifications:

• Lens Construction: 4 groups – 4 elements
• Working Depth: 50 Meters or 200 Feet
• Magnification: 0.54X
• Angle of Coverage: 20mm
• Mounting: M46 thread with M52 to M46 Step Down Ring
• Lens Coating: Anti reflection and water repellant coating
• Barrel Material: Aluminum alloy with black hard anodize
• Weight: 320 grams
• Dimensions: 80mm X 45.9 mm [D]

Επικοινωνήστε μαζί μας για τιμή

Fiber Optic Cable kit for Inon Digital Flashes, like the Inon Z-240 Digital flash.

Cable is 2 meters in length [6 ft] with special attachment to strobe sensor.

Velcro attachment for attachment to camera housing side.

Weight: .02 kg

Επικοινωνήστε μαζί μας για τιμή

FML-01 Macro Lens is an accessory macro lens which fits over the housing’s port and can be installed and removed during the course of the dive. For 46 & 55mm threded Lens Ports & Lens Adaptors

Compatible with:

Fuji Housings F30,F40,F50 Additional Adaptor ring Requiered

Fantasea Compact Digital Housings (all but FS-5, FS-6 FS-9 and FS-51 Housings).

Additional Adaptor required for the CP-5 and CP-7 Housings.

Additional Adaptor required for the CP-3, CP-3N, CP-4, CP-6, FL-3, FL-4, FL-6, FP-1 and FP-4 Housings.

Can be mounted directly on top of all other Fantasea Nikon Coolpix housings lens ports (all but the FS-5, FS-6, FS-51 and FS-9 Housings).

Almost all Olympus housings

Other housings with a 46mm or 55mm threaded lens port.

Specifications:

• Lens construction: single aspherical element.
• Focal length: 333mm (underwater)
• Barrel material: aluminum with black anodize
• Includes M46 to M55 step-up ring

Επικοινωνήστε μαζί μας για τιμή

Fiber-connector DS is for synchronization firmly between digital camera housing and ES-150 DS digital strobe. Weight: 0.12kgs

Επικοινωνήστε μαζί μας για τιμή

This Ikelite 5503.51 Dome Port allows use of the Tokina 12-24 mm zoom and other wide-angle zoom lenses in Ikelite underwater housing for Digital SLR Cameras.

The Tokina 12-24 mm zoom lens will focus close enough that adding a + diopter close-up to the lens is not required. The port could also be used with the Sigma 10-20 mm zoom lens but there is no zoom control provided. Lens must be used at fixed focal length.

Επικοινωνήστε μαζί μας για τιμή

Sea & Sea 5 pin Sync cords fit the following Sea & Sea Strobe Heads: YS-30IITTL Duo, YS-90TTL Duo, YS-90DX, YS-90AUTO, YS-110, YS-120TTL Duo, YS-300TTL and YS-350TTL/PRO

Επικοινωνήστε μαζί μας για τιμή

The 45 degree angle helps you keep bubbles out of your vision and allows you to get the camera at much lower shooting angle. It gives you the freedom to shoot on the flat ocean bottom while still being able to see through the finder.

These finders are easily user interchangeable, enabling selection of appropriate viewfinder for different lenses, shooting conditions, styles & personal preferences.

These are high performance viewfinders that extends eyepoint without changing image size in viewfinder. 100% of camera’s finder image is seen (1.0x) without any vignetting, even underwater with a mask.

The viewfinder is positioned in parallel with the camera’s finder so viewing replicates same natural eye position relative to camera as when shooting on land.

Επικοινωνήστε μαζί μας για τιμή

You can set up this holder to hold a single lens or two lenses on an Ultralight or Inon arm segment.

Επικοινωνήστε μαζί μας για τιμή

INON [Optical D Cable Type L / Cap Set] is a key component to reliably trigger an external strobe in synch with built-in flash light and each different model is designed specifically to suit to each camera model to attach directly on built-in diffuser panel of genuine underwater housing or a Mount Base. [Optical D Cable Type L]consists of optical fiber to provide more reliable and faultless external strobe control comparing to conventional wireless slave connection especially in severe condition like under surface or backlit circumstances. INON [Clear Photo System] effectively suppress transparent underwater housing drawbacks like backscatter, ghost or flare caused by camera’s built-in flash to obtain more clear image.

Compatible with various camera brands and models depending on the model.

• Optical D Cable Type L / Cap W3 Set
• Optical D Cable Type L / Cap W9 Set
• Optical D Cable Type L / Cap W10 Set
• Optical D Cable Type L / Cap W29 Set
• Optical D Cable Type L / Cap W36 Set
• Optical D Cable Type L / Cap W40 Set

Επικοινωνήστε μαζί μας για τιμή

Key component for «Olympus PT-027 /PT-020  to be replaced with genuine lens port to attach UWL-100 28AD lens.

This INON mount base is designed for the Olympus PT-027 (C-7070 camera), and PT-020 Housings (C-5060 camera). The port replaces the standard Olympus PPO-01 port so that INON attachment lenses can be easily attached or detached underwater once the diffuser is removed. The 28AD Port PT-027/020 body is machined aluminum for durability. The optical glass port is anti-reflection coated on the inside for optimum optical performance.

Weight : 234g (8.3oz) [air]

Επικοινωνήστε μαζί μας για τιμή

INON «Shoe Base Set» enables INON strobe directly attached on compact digital camera underwater housing to provide more «compact» and «reasonable» set-up. Simply installs the Shoe Base Set on the hot-shoe of Panasonic marine-case including [DMW-MCFS5] [DMWMCFX40] [DMW-MCTZ7] or underwater housing from Olympus, Fujifilm and anybody can benefit external strobe shooting with compact gears without complicated setting. The Shoe Base Set is only 68.5mm in length. Boon to divers to keen to «diet» diving gears or divers hesitating to have external strobe.

Weight : 41g  [air] / approx.20g [underwater]

Επικοινωνήστε μαζί μας για τιμή

Set contents: Main Base II, Holder II

The Main Base II is a fundamental component of the Holder II Set and attached on an underwater housing via two tripod screws or one tripod screw on Nikonos V to attach Arm II strobe arm system directly. The Holder II comfortably supports the back of your right hand with pre-installed 10mm neoprene rubber when holding INON X-2 series housing or Nikonos V and is slidingly adjustable to suits to different hand size. INON strobe arm system is directly attached on the Holder II.

• Weight : 212g (7.5oz) [air] / approx.66g (2.3oz) [under surface]
• Compatible Underwater Camera Housing: INON X-2 for EOS10D, INON X-2 for EOS20D, INON X-2 for EOS30D, INON X-2 for EOS50D/40D, INON X1-Z, INON X1-NZ, INON X-LZ, Nikonos V, NikonosRS, Olympus PT-E03, Olympus PT-E05, Olympus PT-E06

*Nikonos V/RS is fixed by single tripod screw.

Επικοινωνήστε μαζί μας για τιμή

«AD Mount Base・PT-041″ enables to use INON «AD Mount series» attachment lens. AD mount series attachment lens lineup consists «UFL-165AD Fish-eye Conversion Lens» to shoot ultra wide image, «UWL-105AD Wide Conversion Lens» to shoot wider area and «UCL-165AD» to shorten minimum focus length to close to a subject.

Επικοινωνήστε μαζί μας για τιμή

This INON mount base is designed for the Canon DC2 housing, which accommodates the Canon A540 camera.

The AD mount base is the attachment point for INON’s UFL-165AD Fisheye, UWL-105AD Wide Angle and UCL-165AD Close-up lenses.

The AD Mount Base is compatible with the Optical D Cable/Cap W29 set fiber optic cable for strobe use (INON D-2000Wn, D-2000W, D-2000S, D-2000, D-180, D-180S, Z-240, Z-220, Z-220F and Z-220S)

INON Grip Base (DII or DIII) or ULCS Digital Tray (tr-d) can also be attached to the bottom of the mount base if needed.

Επικοινωνήστε μαζί μας για τιμή